Movies Essays - Aftermath Of War, Wars Of Independence,

Movies Each war had a serious impact on the individuals surrounding it, whether it be the soldiers, Indians, slaves, women, children, and even the entire feeling of the countryside. The commonality in each of the three films, "Last of the Mohicans," Mary Silliman's War," and "Glory," was war, but each centered on a different segment of the population and the different wars of the time period. The French and Indian War was depicted in the "Last of the Mohicans," showing the trials the settlers of the countryside faced while the French fought for control of the union against the British in the mid-18th Century. Focusing on the strengths of women, "Mary Silliman's War" encompasses the revolutionary war as the Americans try to break free from Britain. Finally, the inner fight between the Union is depicted in "Glory," which gives startling footage on the black man's struggles in the fight for emancipation. Through studies, in course work, various books including Boorstin, Brinkley, Gross, and others, and by watching the films, a better understanding of the trials of freedom that American individuals undertook in the 17th and on into the19th Century was received. A connection of the feelings, emotions, and trials of the history of all Americans is felt and interpreted in the following paragraphs. As the first white settlers came to what is to be America in the early 17th Century, the struggle for power was inevitable. Looking through time and history, power has always been a key factor in the lives of the people of the nation, and it still is today. The nine years of the French and Indian War (1754), which was in part depicted in the "Last of the Mohicans," showed how two countries were fighting over control of the people and land of the colonies. We can see that the fighting had to do with power and control of other people and property. Feelings for those not in the war, innocent people, were overlooked and pushed to the side. In addition, the first American settlers, the Indians, were treated as pawns in a bigger game only to take what was theirs to begin with. Both the French and the British tried to win the Indians over, only to later push them further into the western countryside, until there would latter simply be no room for them. "Mary Silliman's War," focusing on the revolutionary time period in the late 18th Century, included the powerful struggle of the British to control the Americans. Instead of the struggle for the power of the land, at this point the British had the land and now focused on controlling the freedoms of the people of the nation. When the British felt as if they were loosing control, they grasped to incorporate a tighter system of government into the lives of Americans. The rejection of this control lead to the many horrifying years of war. The efforts of Americans to create a better nation did not end here. The northern and southern parts of the nation were not yet unified, even after fighting against the British in the revolutionary war. In fact, it was difficult to combine the entire nation and not stay divided in tiny communities as in the past. These factors, along with many other differences of opinion when dealing with the colored people of the nation, lead to an even greater power struggle than ever before. The southern Confederacy wanted the power to control its own nation, separate from that of the northern Federacy. The people and leaders in the south did not want to give up control of "their" slaves. The white man felt power by controlling what he thought was a lesser person, in this case the blacks. Seen again and again in the history of Americans, the power to control other people, for example, the Indians, slaves, and women, were victims in the struggle of the white man to feel superior to others. Whenever a problem would arise where power was threatene! d the country would then became engaged in battle. The movies were unique in their own element, because they focused on a group of individuals and carried out their story of becoming part of the nation. "The Last of the Mohicans," was very bold in showing how the leaders of the British side reacted to the French and to the people of what is to become the United States of America. It also

Ohms law Essays

Ohms law Essays Ohms law Paper Ohms law Paper In this investigation I want to find out how the length of and the width of the wire affects the resistance. Resistance: An explanation of what resistance would be that resistance is the opposition of a conductor to a flow of current. It is when traveling electrons in a wire collide with the atoms of a wire. The collisions between the electrons and the atoms cause the electrons to move slower, which causes resistance. So, resistance would be how hard it is to move electrons through a wire. Resistance is measured in Ohms ( ) Resistance = resistivity p (ohm metres) x length l. Cross-sectional area A (square meters) Current flows through a wire by a flow of electric charges. Wire is made up of a lattice of positive ions, surrounded by free electrons. Ions can only vibrate about in their fixed positions but electrons are free to move randomly from one ion to another. When the battery is attached to the wire, the free electrons are repelled by the negative and attracted to the positive. They still have some random movement but they move slowly in the same direction through the wire with a steady drift. Ohms Law: In 1827, a German physicist discovered relationship that the amount of steady current through a large number of materials is directly proportional to the potential difference, or voltage, across the materials. Thus, if the voltage V (in units of volts) between two ends of a wire made from one of these materials is tripled, the current I (amperes) also triples; and the quotient V/I remains constant. The quotient V/I for a given piece of material is called its resistance, R, measured in units named ohms. The resistance of materials for which Ohms law is valid does not change over enormous ranges of voltage and current. Ohms law may be expressed mathematically as V/I = R. That the resistance, or the ratio of voltage to current, for all or part of an electric circuit at a fixed temperature is generally constant had been established by 1827 as a result of the investigations of the German physicist George Simon Ohm. Alternate statements of Ohms law are that the current I in a conductor equals the potential difference V across the conductor divided by the resistance of the conductor, or simply I = V/R, and that the potential difference across a conductor equals the product of the current in the conductor and its resistance, V = IR. In a circuit in which the potential difference, or voltage, is constant, the current may be decreased by adding more resistance or increased by removing some resistance. Ohms law may also be expressed in terms of the electromotive force, or voltage, E, of the source of electric energy, such as a battery. For example, I = E/R. With modifications, Ohms law also applies to alternating-current circuits, in which the relation between the voltage and the current is more complicated than for direct currents. Precisely because the current is varying, besides resistance, other forms of opposition to the current arise, called reactance. The combination of resistance and reactance is called impedance, Z. When the impedance, equivalent to the ratio of voltage to current, in an alternating current circuit is constant, a common occurrence, and Ohms law is applicable. For example, V/I = Z. With further modifications Ohms law has been extended to the constant ratio of the magneto motive force to the magnetic flux in a magnetic circuit. Resistance values in electronic circuits vary from a few ohms, W, to values in kilohms, kW, (thousands of ohms) and megohms, MW, (millions of ohms). Electronic components designed to have particular resistance values are called resistors. Hypothesis: Resistance is caused by electron bumping into irons. If the length of the wire is doubled, the electrons bump into twice as many irons so there will be twice as much as resistance (resistance as a length. ). If the cross sectional area of the wire doubles, there will be twice a many irons and twice as many electrons bumping into them, but also twice as many electrons getting through twice as many gaps. If there are twice as any electrons getting through, as there is twice the current, the resistance must have halved. This means that resistance a 1 (cross-sectional are of the wire). I am assuming that the temperatures are kept constant and that the material is kept constant. We can include this in our equations by adding a constant R=PL/A Where P=Constant R=Resistance L=Length and A=Cross-sectional area of the wire. The equation R=PL/A is found like this: We have 2 equations RAL and RAL/A If we combine them we have RA1 i L/A which becomes Ra L/A If we add a constant P then we have our equation R=PL/A Preliminary Work I will use nichrome wire, because it has more resistance compared to nickel and copper. I have chosen to test the length, as it is simple to compare the average resistance when the length has changed. I tested nichrome, nickel and copper wire and found out that nichrome is the best to use. The resistance of a wire depends on certain factors. Some of these variables are listed below:   Length of wire   Diameter of wire Temperature at which wire is at   The material of which wire is made out of   The potential difference across circuit   Cross sectional area Factors: The factors I believe that will affect what happens in the investigation are: 1) Diameter/Cross sectional area: A good example to illustrate this where two cars are travelling down a dual lane road side by side. As soon as the road changes to become a single lane road, it is impossible for the cars to travel side by side and one must stop and resume behind the other car. This same can be said for electrons in a wire, the larger the diameter/cross section, the more electrons are able to travel trough the wire at the same time. 2) Temperature: When the temperature of a metal increases the resistance of that metal increases. This is because when the temperature increases the atoms of the metal vibrate more vigorously because of the increase in energy. This means that the electrons have more difficulty getting through the wire as they collide with the atoms which are in their pathway. This increases the amount of collisions therefore there is more resistance. However it is hard to keep the temperature exactly the same as the room temperature might change from day to day. It is essential to use a low voltage because it means a low current that will not heat up the wires. If a high voltage is used the energy would be in form of heat which would make the experiment unfair. The investigation will be done at room temperature. The temperature cannot be investigated because it is hard to control the range of temperature needed without the correct apparatus. 3) Length of wire: The larger the length of the wire, the larger the resistance. This is because there are more atoms from the metal so there is more chance that the electrons would collide with one of the atoms therefore there is more resistance. The length of wire will be variable throughout the investigation. Electrons have a longer distance to travel when the wire is longer, so there are more collisions . The length of the wire will make a difference to the resistance. This is because when you have a long wire, the electrons have to squeeze together for longer to be able to pass through the wire than they do in order to be able to pass through a short wire. 4) Type of material: Different materials have different resistances because the materials atomic structures are different so some metals have low resistances and some have high resistances. Therefore it is important to keep the material the same throughout the experiment unless a different material is used to check if the conclusion or theory works for all materials.

North Korean and South Korean foreign policies Research Paper

North Korean and South Korean foreign policies - Research Paper Example After the North Korean nuclear emergency of 2002, the amount of US aid has decreased significantly, and US has sent almost no resources to KEDO since the organization’s executive board chosen to stop oil consignments to North Korea during November 2002. Probably, the decrease in assistance levels has dropped the already small influence US aid had put on North Korean attitude, mainly with respect to China’s as well as South Korea’s sustained support and improved trade. 1. Introduction United States as well as South Korea usually considers eventual political incorporation of the Koreas in an egalitarian government from the South as unavoidable. Nonetheless, the type of association, that is, by North Korean failure or ongoing incorporation of the North and South, is still the issue of deep political argument and inconsistency between concerned groups, who take account of South and North Korea, United States, Russia, China and Japan (Cha, p. 102). ... North Korea's communist regime has governed a state-ruled financial system traditionally reliant on huge help from Russia as well as from China to carry on. In the same time, South Korea has grown into one of the world's most significant financial systems, utilizing â€Å"free enterprise† financial strategies as well as promoting a democratic regime. From the 1990s, North and South Korea have owned two symbolic meetings and improved financial collaboration to some extent, although reunification still appears to be a comparatively ‘far-off’ objective, barring unanticipated proceedings. The American armed forces concentrated on managing surrender of Japan. â€Å"Little changed at first in the administration of the south; officials then serving under the Japanese authorities remained in their positions. The United States dismissed the Japanese governor general in the middle of September, but many Japanese officials stayed in office until 1946. Those decisions angere d many Koreans† (Kim et al, p. 192). From the year 1948 until the beginning of the Korean War in 1950, North Korean armed forces continually initiated clashes on the border. â€Å"On June 25, 1950, Kim Il-sung sprung his full military force, with the backing of the Soviet Union, against the South† (Kwak & Joo, p. 118) to initiate the Cold War's earliest combat. The United Nations, driven by the United States, rapidly arrived for South Korea's security. The Soviet Union provides support the war surreptitiously whereas Marxist China sent a large number of armed forces for North Korea. The conflict fumed until July 27, 1953 when a peace agreement introduces a ceasefire that is still valid today. Economically,

Dell Computer Make to Order (MTO), Make to Stock (MTS) & Assemble to Assignment

Dell Computer Make to Order (MTO), Make to Stock (MTS) & Assemble to Order (ATO) - Assignment Example The researcher states that the Make to Order process maintains quality and the products can be personalized during manufacturing and delivery that creates value for customers. This process has no finished goods inventory. The make to order has a disadvantage since it has intermittent production. Dell Company can benefit from MTO process due to reduced inventory space and can customize their products. From a tax, related standpoint Dell Company may benefit from the process. In terms of customization, Dell Company can customize their products with materials, size, and color.The Company may benefit economically from the process since assembled goods must have more warehouse space. Delaying assembly until a customer makes an order reduces labor cost for the company before payment. However, the company may experience delays since products take longer to produce and deliver. Customers may opt to make orders from other companies that offer quicker deliver products. Assemble to Order is a pr ocess that involves making a part and sub-assembling the products. The process is completed when a customer makes an order. It is a business strategy in production that produces quickly and customized in certain ways. It requires that basic parts are manufactured but not assembled. When an order is placed, the parts are assembled and sent to the recipient. The process has its own advantages in the sense that it has fewer inventories and the service is faster. Its main disadvantage for Dell Company is that it has WIP inventory. This process is appropriate for a computer industry Dell company can benefit from this when large numbers of sub-assemblies are put together. For example, assembling the motherboard, video cards, fans, and battery power are put in one location and the final assembly of the laptop is made easier when an order is made. It enables Dell Company to push inventory back that makes it possible to receive payments for the hardware before other parts are paid for.

Information Systems Essay Example | Topics and Well Written Essays - 2000 words

Information Systems - Essay Example The next to be exhaustively discussed are the differences that make a company unique. A detailed examination of these unique qualities will be essential in determining how ERP or any software implementation no matter how the company complies with the standard as mandated by the software still manages to operate differently. Using SAP as an example of how applications affect or impact companies within the same industry this paper shall detail the way SAP is implemented. The details of how SAP is implemented hopefully would provide a logical explanation on how the company’s collective consciousness and culture influences the decision of every individual in the company. This paper shall similarly examine how the collective consciousness and culture is displayed if not manifested. ASAP or accelerated SAP is the process in which SAP is implemented or rolled-out in every company. The utility of the ASAP itself indicate the commonality of how SAP is implemented indicating that each c ompany has the same processes that could be automated by SAP (Khan, 2002). However, even if SAP’s implementation is managed uniformly, there exist variances in the way companies operate even if they are using the same application or were implemented in the same way. According to ASAP, the business processes of each company intending to implement SAP could be documented uniformly using the same discovery techniques. However, ASAP equally mandate that in the documentation of the business processes it is imperative that the business process owners (BPO) and the subject matter experts (SMEs) assist if not be the one to define the â€Å"as is† processes. In the development of the â€Å"to be† process, the SMEs and the BPOs are not only needed but is also essential (Keller & Krugger, 2002). The standards The IFRS (International Financial Reporting Standards) are not only accepted by companies all over the world but governments likewise use the standards imposed by IFR S in conducting audits to companies. The provisions and interpretations of each terminology are therefore the uniform and constant all over the world. The format in which reports are printed or displayed on screen is equally identical (Mackenzie, Coetsee, Njikizana, & Chamboko, 2011). To illustrate: The way â€Å"revenue† is defined in one country or specifically in a company is the same all over the world. This is similarly true for the word â€Å"expense† and â€Å"taxable income† and a few more. The way debit and credit is qualified is also the same including how it is presented in the books or ledgers of the company (Bragg, 2010). Regulatory Reports are the reports mandated by the government. A close examination of the reports of each country would reveal that even though the format maybe different but the contents are generally the same. The way Financial Statements are presented all over the world is also the same. This would include the way books are main tained and logged (Morley, 2009). Standard Management Reports for each industry is also the same. The contents are the same even the presentation is the same. However, even SAP acknowledges that there are some management reports containing specific information that are needed by a certain

Internal and external influences on business opportunities

Internal and external influences on business opportunities Business is like the blood that flows through our bodies, with out business our lives would be almost impossible. Business plays many different roles in our everyday lives. Most people either own or work for a particular business. Businesses make it possible for the community and even further places such as overseas countries to receive and sell goods and services. A business can be anything that provides goods and services to the community such as corner shops providing customers with goods and sweets and they can also be larger companies such as Nike selling shoes and clothing all over the world. Businesses allow for our economy to grow and become stronger, with out a strong economy a country can not run as smoothly as preferred. One of the main reasons why businesses are so important in our everyday life is due to the fact that businesses provide millions and millions of people with job opportunities. If businesses did not exist people will not be able to work and earn money for e veryday living. There are certain factors that can influence a business. These factors include internal and external influences. Internal influences are influences that a business has some control over, such influences include product, location, management, resource management and business culture. Product influences: These influences affect a large majority of the internal structures and operations of a business. Depending on the types of goods and services the business produces will depend on the internal structure. If the goods being produced require certain equipment, these needs must be catered to so that the business may go on with its production. Each type of business has a different set of product influence, for example a service provider will require less preparation, whilst on the other hand a manufacturer will need more services to produce the goods sold. The size of a business can be determined by the different types of goods and services produced and also the availability of technology. So from this we understand that the amount of goods and services produced by a business depends on the size of the business. Poor productivity can be seen in the article Anger at Vodafone Sydney morning herald, this impacts on the business because Vodafone is providing very poor services to their customers, therefore tempting the customers to switch to another network, taking business away from Vodafone. Location influences: One of the most important factors of a business is the location in which that business is positioned in. The location can either make or break the business. Location is especially important for retail and service oriented businesses, as they need to be seen and recognized by customers. The business owner must take into consideration of where he/she chooses to locate their business The business must be in area with a good image, for eg not a poor suburb, they business must be located in a place were customers are consistently walking past and spotting the shop, for eg in the city. Another important thing is that the business must be convenient towards the customers, so that they may take the time and effort to check the place out, if the business is located in a area which is not convenient the customers may loose interest and go somewhere else. Resource influences: -Basically there are 4 main types of resources available to a business, these include: Human resources Information Resources Physical resources Financial resources Human resources may be considered as the most important resource, for they are the employees that allow for the business to run. Information resources are all the actions in which the business takes to research and learn more about their situation for eg sales reports. Physical resources include all the equipment and tools necessary for running the business. Financial resources are basically what the business depends on to buy and help support their business, for example to buy new machines. Management influences: There is no doubt that over time businesses and the way in which businesses are run have dramatically changed. Management has been a part of business that has been changed in an effective way. In the past there were many levels of management and hierarchy in a business that new ideas and issues had to go through, but now due to many factors such as the pressure of competitiveness from globalisation the way in which businesses are run have been altered. These days there are much fewer levels that new ideas and issues have to go through, this will result in quicker and more efficient decisions that in the long run will allow the business to focus on the way it runs. This allows businesses to adapt quicker and more efficiently to the ever changing needs and wants of consumers because there are fewer managers in which the process of decision making must go through. Business culture: In reality every business has its own type of business culture, these are all the values, beliefs and ideas that are agreed upon by all employees and managers of the business. The culture of a business is shown in the way in which the business acts and performs. Business culture is usually shown in the rules and regulations of a business such as the way staff are expected to dress and behave. Culture has been proven to be a necessary tool that must be used by businesses to achieve the best out of its staff members and customers. Business culture is proven to be important in the video Australias food fight: west farmers vs. Woolworths. Coles have changed their business culture by undergoing management change, which has allowed for a different culture to be applied, and this has proven to be successful as they are now basically ahead of Woolworths. Internal influences have an extraordinary impact on business in Australia. They include every thing from were the business is located to how the business is run. The location of a business basically is essential for the success of the business, depending on were it is located, it must be convenient and visible to customers. If it is not located in a convenient area customers may not be able to get to the business and purchase from it. The management of a business is the way in which the business is run, in order to have a successful business it must be under good management and the necessary actions must be taken when they are called for, for eg if employees are needed to be cut off, due to lack of financial sustainability. So basically it is essential for businesses to be affected by internal influences in a positive way. External influences External influences are factors that a business may have little or no control over, such factors include: Economic, financial, geographical, social, legal, political, institutional, technological, competitive situation and markets influences. Economical influences In Australia and the rest of the world, the economy experiences economic cycles. These cycles include booms and busts (recession). Basically during an economic boom the economy experiences higher levels of employment, they may be so confident in their sales that they may increase the price of items to gain higher profits. Also during booms wages of employees tend to increase as more profit is being made by the business. However the economic cycle does have its down side, such as when the economy is experiencing a recession period. An unfortunate reality of recessions is that employment rates decrease due to the fact that the business is not making enough sale profits to keep their employees. Another effect of recession is that business may not be able to raise the price of their products because people are not purchasing so they may have to even lower prices to continue to compete in the market. The influences of economical factors are shown in the article Petrol prices soar and no r elief in site. Due to the poor economical status prices are raised and customers may not be able to purchase petrol at this price. Another ecomical influence can be seen in the radio article impact of floods on grocery prices 2GB, Sydney, this impacts on the business because all the crops are being destroyed making it impossible to make a profit, with farmers not making profits the economy will suffer and be under pressure. Financial influences Financial influences impact a business in several ways. due to deregulation which is basically the extermination of government regulation in an business, Businesses are now able to improve competitiveness with each other. Even better, now due to globalisation, Australia is now able to trade goods overseas, further more improving the financial sustainability of the country. Geographical influences Geographical influences impact businesses in many ways. Australia is located in the Asia-pacific region, the economical statuss in these surrounding countries are very important in the interest of Australia. Basically if china is doing well, it may be able to trade goods and services with Australia creating an advantage for both countries. Another thing is that a lot of Australian companies are located in the Asia-Pacific region, so the countries must be economically doing well for the Australian companies to survive. Also the demography of the country has a significant influence on businesses, for eg Australia must be run to suit people of all different cultures, ages and sexes. One major demographic impact on Australia is the ageing population, with an ageing population there must be centres and facilities created for elders. Also with people retiring, their jobs will need to be completed by younger people, who may not be as experienced as the retired worker. Globalisation is also an important fact of geographical issues, due to globalisation Australia is not tied down just to trade goods and services throughout Australia, but how ever to do so around the entire world. The impact of globalisation can be seen in the video picking up an Aussie apple, we see that Australia is beginning to import overseas apples to Australia. Social influences Social influences have an sever impact on the success of a business. For eg as time goes on peoples taste in fashion and trends will change. If businesses do not adapt to these changes they may be affected in a very negative way. In order for a business to make a profit they must take into consideration all the new fashions and trends going around. One other major social influence is the influence of of our environment which is basically wearing away day by day, businesses must always consider what is in the best interest of the environment, for eg not giving out plastic bags after a sale. One final issue is the issue of family-work practices, as women give birth they must leave work, and this may result in the business losing an employee, affecting in the production of the business. An example of social influences can be seen in the article Petrol price soars and no relief in site, With the rise of petrol, the people in society may decide that instead of using cars, they can probabl y save money by using public transport or riding a bike to work. Legal influences Businesses can not just do as they please. There are many legal actions that influence businesses and basically tell them what they can or cant do. With more and more laws being passed onto businesses, the business must adapt their company to what the law is telling them to do. Generally the people of a society expect that businesses may run under the rules and guidelines provided by the law. Businesses must be aware of all the laws so that they may not breach them and pay the penalties. Political influences Even though political influences may not be the most affective factors onto a business, they still have a pretty heavy impact. For eg whenever a new election Is held, the new government may introduce new policies. A policy that was introduced in 2000 was the goods and services tax, this was a 10 percent tax on the supply of most goods and services used in Australia, this affected businesses in a way that they had to collect taxes basically on behalf of the government. However deregulation has also been introduced in the picture in the past few decades, this is the removal of government regulation in industry, and this takes pressure off businesses and allows for a greater range of competitiveness. Institutional influences Three institutional influences on business are government, regulatory bodies and trade unions and employer associations. Government: Three levels which are federal, state and local. Federal government deals mainly with issues such as tax, making sure that the taxes are being paid and also things such as how the businesses are running in according to the customs regulations. State governments deal with lower case issues such as workers rights and responsibilities such as OHS requirements and making sure businesses are abiding by the state laws and trade practices Local government deals with issues such the condition of building and making sure of improvements, parking rules and fire regulations Regulatory bodies; These bodies observe and understand the way that businesses deal with certain issues and how the business treats its community and consumers. Examples of regulatory bodies include: the Office of fair trading and the Australian competition and consumer commission. (ACCC) Other institutional influences are Trade unions and Australian stock exchanges, these groups have aims such as improving working conditions and pay rates. Technological influences Technology without a doubt has had probably one of the most affects on businesses. With new technologies being invented and discovered every day this can only help improve productivity and efficiency for businesses. Technology has allowed for robotic machinery to be used in productivity which in the long run cheapens the cost of productivity as no employee or has to be paid. Robots also help to reduce the amount of boring and repetitive jobs that some humans may have to do. Also communication technology has been improving rapidly over the past few years making it even easier to communicate with suppliers and consumers, with out them actually being there. Businesses must strive to use the available technology to the best of their ability so that they may keep up or even be ahead of competitors. Competitive situation influences These influences may be very helpful and useful to both consumers and producers, for eg when two businesses are competing to be the market leader, they will lower costs of their stock to attract customers. As a result they will be making more sales and more importantly a profit. These competitive situations also benefit consumers because with competition in a market there will be a greater range of goods available for consumption, this allows the consumer to get a wider variety of choice when considering the good or service they want. Competitive situations are shown in the video Australias food fight: west farmers VS Woolworths as these companies are competing with each other to get the most customer satisfaction, It also discuss how the affects of globalisation such as Aldi here in Australia also competing amongst the big guns. Another example of competitive situation is shown in the article Anger at Vodafone, with Vodafone giving such poor services, customers will want to change to another network providing greater coverage. External influences have a major impact on our every day lives in Australia, with all the different types of factors such as social and technological influences our lives are affected on a day to day basis. If external influences did not exist we would not be living in a society were goods and services from all around the world are accessible to us for our own usage. External influences can be both positive and /or negative for example, competitiveness in the market allows for a variety of options for consumers to choose from but contrasting the effects of external factors such as geographical issues involving the weather can have a negative affect, for eg flooding in farms or drought seasons. Conclusion As mentioned in the executive summary above, business can be compared to the blood in a living organism, it is essential for our everyday survival and living. Business allows us to live the pleasures and entertaining lives that we live each day. Internal influences summed up can be recognized as influences that a business can control whilst external influences are those factors that the business can not control. Internal influences for eg can be explained as factors that a business can use and apply to help determine the success of their business, such as the location in which they choose to place their business. External can be explained by using the example of a economic recession, this can affect the business in many negative ways such as letting employers go. So summed up we can say that business is essential for everyday living and it can be broken down into two different types, Internal and external, and it can be concluded that they basically determine how the business is run and how successful it will be. The end L

The Exploitation of Little People :: Exploratory Essays Research Papers

The Exploitation of Little People Once upon a time, there lived a beautiful maiden Pallid Powder amidst seven dwarfs.There was a dwarf who worked in a sideshow display at the local circus, a dwarf who was frequently cast by Galactic Studios for the dancing baby parts, and all the other dwarfs locked themselves in their isolated cabin in the woods so that the nearby villagers wouldn’t laugh.These snippets—both fictional and real—are all most people know about the lives of dwarfs, or little people as they prefer to be called.But Ursula Hegi’s novel Stones from the River suggests that dwarfs were stereotyped, and although the information I found was limited, I found enough to satisfy myself that many dwarfs in the past—and even today—have been exploited or treated unjustly by others. In order to understand why dwarfs are exploited, one must understand the genetic disorder itself.Dwarfism, according to the Little People of America Research Fund, â€Å"is the result of the disproportionate growth of the skeleton,† a condition mostly predetermined by the genetic code.Some symptoms, according to WebMD, include short stature, the appearance of a larger head, abnormally shaped hands, a waddling walk, along with â€Å"increased inward curve of [the] lower back making the buttocks appear more prominent (lordosis), and increased outward curve of [the] upper back making [the] back appear slightly hunched (kyphosis)† Clearly, dwarfs have physical differences that make everyday life more difficult for them—even without exploitation by others.The simplest aspects of life are often difficult for dwarfs.They have difficulties finding furniture to fit their small bodies, and household chores such as washing dishes become almost impossible without the use of a stool.Other things, such as finding clothing to fit or just being able to drive a car, are also difficult for them. But beyond the inevitable difficulties presented by their size, there are other ways that dwarfs—because of their size—are intentionally exploited by others.One way they are exploited is being used to make money for others.A researcher on the topic, Laurence Bathurst wrote in his reply to Judith Irving, a dwarf, about such mistreatment: There are some really gross and demeaning ways in which short statured people are exploited such as dwarf throwing contests, dwarf wrestling, and generally, the portrayal of short statured people in movies and television that endows them with ‘special’ characteristics (either evil or good). Circuses and sideshows use dwarfs as exhibits and often claim ownership of them as well.

Ryanair Case Study

Nova School of Business and Economics 2012/2013 DOGFIGHT OVER EUROPE: RYANAIR Case Study This set of questions refers to Version (A): 1. Which kind of customers was Ryanair trying to attract when, in 1999, Michael O’Leary took charge of the firm? Those with a low price elasticity of demand or those with a high price elasticity of demand? Explain.Considering that we are talking about the same product, in an industry with many firms, where producers and consumers know all quoted prices and where the consumers can identify the product as homogeneous, it is fair to say that we are talking about a scenario close to perfect competition, thus demand for the product is very elastic. So, Ryanair is trying to attract high price elasticity customers.Accordingly to the article: Ryanair marketed itself as â€Å"the low fares airline†; before open new routes, the company cared about low landing fees, low turnaround costs in order to be able to charge low fares to customers; it made a greements with secondary airports, where they did not pays fees (in fact those airports paid to Ryanair to use their locales); it tried that 70% of the available seats in the two lowest fare categories; it made fewer restrictions on its tickets (important for who had extra bags, or who wants to change the flights in order to pay less); it observe competitors, so it would be able to apply a lower fare; its customers were a mix of leisure travelers (70-75%) and business travelers, mostly from small and mid-sized businesses (25-30%). ifferences in airfares could persuade some leisure travelers to visit one destination rather than another; it has chosen the cost leadership so it seeks to be the lowest cost producer in Europe by selling standardized, mass products and Ryanair’s profit maximization was through lower fares in order to attract more customers contrarily to competitors where they maximize their profits through find opportunities to increase fares without losing custome rs. So accordingly to the customers with a high PED (price elasticity demand) following the formula (Q/P) x (P/Q): a little negative variation in prices (decrease in fares), will originate a big positive variation in the amount sold. 2. Why was cost cutting so essential for the strategy chosen? First of all it is important to refer that in 1991, Ryanair was facing a bankruptcy.In response, ‘the company removed all frills from its service, cut its costs to the bone, and dropped its fares to levels unheard of in Europe’. It became priority, to connect all the efforts to preserve and generate cash. Company’s main concern was charge lower fares in order to attract high elasticity price demand customers, with this new strategy, the company became low-cost or low-fare airlines and to maintain it within these measures the firm needed to adapt its strategy to new restrictions, which means, cost cutting. The flag airline faced a really competitive market (in 1999), and to keep competitive the firm had to keep its strategy, and for that was necessary cost cutting. Cost cutting, if it is efficiently done, brings more profits.Besides, using the model used in classes, â€Å"Bertrand – Asymmetric Model† where it says that if certain firm charges ‘P1’ for its product, and other firm charges ‘P1-e’ (because it is able to reduce its marginal cost), so the second firm will get all the demand. Well, Ryanair did not get all the demand, but is observable in ‘Exhibit 4’ that the company carried approximately 60% (353/575) and 56% (180/321) of the passengers on the route ‘Dublin-Manchester’ and the route ‘Dublin-Glasgow’ respectively. 3. Ryanair uses a performance-based pay scheme to compensate its flight attendants. Why? A performance-based payment scheme combines the interests of both flight attendants and the company. This happens because obviously, the flag airline will gain more i f the attendants are working efficiently (making an effort to sell the snacks, drinks, or whatever they have on board; being nice with the passengers, and help them as much they can), then if they are lazy during work. If a salesperson receives a fixed wage, no matter how much it sells, then he or she will not have any incentive to sell more than the expected. But, of course, if they receive an extra commission for each sale, then the salesperson will do the effort that it maximizes its utility. By having a higher effort, the workers have a higher payoff which maximizes its utility.A sector payment or an in-flight sales commission allowed flight attendants to earn 10% more than those from competitors and allowed the firm to fly to 50% more sectors than its rivals. Consequently, a higher number of flights increase the profits of Ryanair. The company’s rapid growth permitted job mobility, for instance, a flight attendant could take a job at the yield operations management on th e headquarters; job mobility was a solution for the company to avoid coordination problems. 4. Why wasn’t this performance scheme also offered to maintenance personnel? The majority of European airlines pay their employees based on the length of their tenure with the company. However, Ryanair only applied this to their maintenance and engineering personnel.As a company obsessed with cash, the most important part of the business was the operational part, the one which actually gave money to the company: flights and duty-free revenues. So, this was the only personnel where it was justifiable to apply a performance-based pay scheme. Engineering and maintenance were paid based on their formal qualifications: more qualified personnel would do the job more accurately. Maintenance personnel only represented 9,34% of the total employees as of March 31, 1999. Besides the company concerns about security: let’s say that if they receive a fee for each plane that is ‘fixedâ⠂¬â„¢, they will want to fix the maximum planes, as fast as possible, and that may not be the best for the passenger’s security.It’s more important to seek personal with higher qualification, and pay them a reasonable (but fixed) salary, because this is kind of business where mistakes cannot happen, and so, the personnel has to be focus in its work, and not in the ‘extra money’. 5. Can you suggest means of rewarding maintenance personnel that would induce high productivity without hindering Ryanair’s strategy? Ryanair’s strategy is keep low fares so it will be able to keep â€Å"fiercely competitive† and â€Å"ferociously cost conscious†, which implies, minimize costs (everywhere where it is possible), so increase their salaries would hurt the company’s strategy. Given this, it would be a good idea to search for some ‘non-monetary’ alternatives.First of all give them some lectures about how important is to do a good maintenance of the aircraft, aware them that a single mistake can be fatal for hundreds of people (unless they are murderers or mentally sick people they will get alert! ). They can make promises to them in the long-run like if there are no mistakes, Ryanair’s credibility increases, and that will attract more passengers, which means more revenues, which means they can increase wages (and keep the same profit). Monitoring them is a good way of keep the high productivity, this measure leads to an increase in veracity of the employee's reports, in other words, if an employee knows that he or she is being watched, then it will for sure do a better job.The creation of bureaucracy that implies the creation of rules in order to limit the employee’s actions, these rules can be benefit for the maintenance workers, for example, the creation of a rule that says it is mandatory to do a 15 minutes break, every two hours. 6. What are the likely consequences for Ryanair of a steep decrease in the price of jet fuel brought about by a significant decline in the price of oil? Consider both the direct and the strategic effect. All the airline companies are strategic complements, which mean that if one firm takes one action, the others will respond with aggressively actions (upward sloping). And they exhibit tough commitment, in other words, is a commitment that is going to have an adverse effect on the competitors.In Bertrand (this case), the company makes a tough commitment, no matter how much its rival changes the price, the firm’s price will be lower than it would have been if there were no commitment. The companies make tough commitment to avoid that new entrants increase the price competition. Given this, we built the following graph: The red line stands for direct effect and the blue line stands for substitution effect. The direct effect is the commitment’s impact on the present value of the firm’s profits, assuming that the compe titors’ behavior does not change. Applying to the case is basically the profits that all the others airline companies would earn if Ryanair would not decrease its prices as well (point 1 to point 2).The substitution effect takes into account the competitive side effects of the commitment, this means, how much does the tactical decisions of the rivals change, under the commitment conditions. Basically is the adjustment made by Ryanair after the competitors decrease their prices (point 2 to point 3). Decline in the price of oil, brings a decrease in the price of jet fuel. With this shock, all the airline companies will decrease their prices, P1*’. As it was said before, Ryanair always observes its competitors, and then make its move, so they will decrease their tickets’ prices even more, P2*’(one of the principals of tough commitment). As it says in exhibit 2, ‘fuel ; oil’ constitutes approximately 16% of its costs (6. 0/37. ), so despite it is not visible on the graph (due to lack of data related to prices), the prices of the flight’s tickets will decrease considerable, because (repeat) this is a really competitive market, and the airline companies find themselves in a tough commitment, that it will originate a decline even bigger that the one it would happen without though commitment. It is important to refer that the company’s product has a low-level of horizontal differentiation because the difference between the products of each one of the companies is based on the quality in the in-flight zone. And there are tons of people who simply do not care about that.For those ones, their only concern is to get to their destination. 7. What are the most serious threats that Ryanair faces? Explain your perspective. Europe Union’s measure â€Å"Under the package, carriers were given full freedom to set fares. Any company was allowed to start an airline provided that it had majority European ownership, adequ ate financial backing, and the ability to meet safety requirements. The package permitted any European airline to fly any route between two EU countries and, starting in 1997, any intra-country route between two European cities. † This measure means no patents’ system, which means that as long as there is positive profit, other companies will enter in the market.Without proper cautions this may lead to perfect competition, where the companies will lower their prices until it equals the marginal cost, which implies that the profit will be zero. Even worse than that is if Ryanair adheres to a new technology (in order to decrease its marginal cost), and if we are in a situation where the other companies can copy and use the technology discovered by Ryanair, the company will have negative profits. Contrarily if the competitors are able to decrease its marginal cost, and the antitrust agencies that may lead to monopoly (if there is a patented system that says that is illegal to copy and use technology of others firms). Possible merges by competitors, which would increase their market share. For example, in 2002, easyJet purchased Go for ? 374m.Ryanair may face laws taken by the antitrust agencies that may limit its actions, for example the use of ‘dumping’ strategy (‘monopolistic strategy’ where the firm sells its products below their production cost in order to eliminate competition, and when it occurs, the firm increase its prices again). Ryanair has faced aggressive marketing campaigns and charity efforts by Virgin Express, subcontracts and reliability on third parties (lower costs), total direct selling and a very informal environment by easyJet, predatory pricing by British Airways’ Go and in-flight entertainment and comfort by Debonair. The last one went bankrupt but all the others provide serious competition to Ryanair despite not achieving the profitable results desired.

Shifting Meaning of Censor

Shifting Meaning of Censor Shifting Meaning of Censor Shifting Meaning of Censor By Maeve Maddox The English word censor is used both as a noun and as a verb. In ancient Rome, a censor was one of two magistrates in charge of the census, the enrollment of the names and property assessments of all Roman citizens. Both census and censor derive from Latin censere, to appraise, value, judge. In addition to maintaining census records, the Roman censors were in charge of supervising public morality. During wartime, military censors are appointed to read the letters of service personnel to insure that no information about troop movements can be intercepted by the enemy. Some modern countries have official censors whose duty is to inspect all books and movies before publication or release to ensure that they dont contain anything offensive to the government or the established religion. India, for example, has the Central Board of Film Certification that reviews, rates, and censors motion pictures, television shows, television ads, and promotional material. Before the current classification system of G, PG, PG-23, R, and NC-17 was established in 1968, the United States motion picture industry was subject to the Motion Picture Production Code for controlling movie content and advertising. Unofficially, many groups and individuals exert themselves as self-appointed censors of the public morality, working to ban books from libraries, or objectionable CDs and magazines from store shelves. The usual meaning of censor as a verb is to suppress or remove those parts of a written work or film that are considered unacceptable for some reason. For example, in the 19th century, a bowdlerized edition of Shakespeares plays was published without such naughty parts as the porters scene in Macbeth. In the 21st century, an overzealous college professor has produced a censored edition of Huckleberry Finn. One normally censors a thing, but Im beginning to notice the word being used of people, as if it meant limiting the behavior of: Croteau and Hoynesdescribe managers censoring their employees In truth, it is totally up to the parent to censor their children to what they read and watch. Dont Censor Me (song title) I found one writer using the word censor as if it could connote magical powers of elimination: How can I censor The Epic of Gilgamesh from existing? [] How can I take this book out from my local libraries so that no one can read it The development of filtering software, often referred to as censorware, probably has something to do the shift from a thing as the object of censor to a person as the object. Censorware prevents computer users from seeing certain types of content in a browser. The software is censoring content, but from the users perspective, the users freedom of choice is being interfered with. Not surprisingly, the word censor is coming to mean something like control. Bottom line: Parents may censor the type of music their children listen to, but they dont censor their children. Corporations may censor the speech of their employees, but they dont censor the employees. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Misused Words category, check our popular posts, or choose a related post below:Has vs. HadDifference between "Pressing" and "Ironing"Is "Number" Singular or Plural?

Electrophoresis Separation of Proteins Cytochrome C Myoglobin Hemoglobin and Serum Albumin by Using Isoelectric Focusing System IEF essays

Electrophoresis Separation of Proteins Cytochrome C Myoglobin Hemoglobin and Serum Albumin by Using Isoelectric Focusing System IEF essays Electrophoresis Separation of Proteins Cytochrome C, Myoglobin, Hemoglobin, and Serum Albumin by Using Isoelectric Focusing System (IEF) Proteins are composed of amino acids. All amino acids are amphoteric molecules consisting of three types of amino acids: neutral, acidic, and basic. Thus, for any protein there is a characteristic pH, called the isoelectric point (pI), at which the protein has no net charge and therefore will not move in the electric field. Electrophoresis takes advantage of this characteristic. Proteins are electrophoreased, and the most negatively charged protein moves closest to the cathode, and the most positively charged protein moves closest to the anode. Cytochrome C was expected to move closest to the cathode, and serum albumin was expected to move closest to the anode. Only cytochrome C was expected to move to the cathode. The other three proteins were expected to move toward anode. The purpose of electrophoresis was to see how a difference in pI makes a difference in the electrophoretic mobility of protein. Four proteins were electrophoreased by using the Tris-Glysin buffer of pH 8.6 and a horizontal agarose gel 1.1 % in isoelectric focusing (IEF) at a voltage of 175 V and at a current of 79 mA. The agarose gel was made by mixing 0.18g of agarose in 1.5ml of Tris-Glysin buffer with a pH of 8.6. That is 100 % * 0.18 (0.18 + 15) = 1.1% of agarose gel. 15 ƒÊl of each protein sample was loaded into each sample application well on the agarose gel without mixing with glycerol solution. After the agarose gels were placed on the stage of the electrophoresis chamber, Tris-Glysin buffer of pH 8.6 was filled in the electrophoresis chamber carefully until the agarose gels were slightly covered with the buffer. Four proteins had electrophoreased for about 50 minutes. The agarose gels were removed from the electrophoresis chamber and stained overnight with the Coomassie Blue to visualize proteins in the agarose gel....

Immigration Essay Example | Topics and Well Written Essays - 750 words - 1

Immigration - Essay Example While some of the realized immigrations are legal, other people cross countries boarders illegally. Many reasons have been offered for immigrations, especially from developing countries to developed countries with economic factors such as search for employment opportunities and better economic status as key. Varying opinions also exist over the effects of such immigration with some views against immigration because of proposed negative effects. There are however positive impacts of immigration that support opinions for allowing immigrants into a country. Immigrants are for example a source of cheap labor for the host economy. This is majorly because of their main reason for immigration that targets jobs in the recipient countries. Immigrants from developing countries are for example driven by unemployment in their countries and the hope of finding jobs upon immigration. Consequently, they are desperate for jobs, and accept lower pays for their economic stability. Difference in macroe conomic factors between developing countries and developed countries also identifies wage rate disparity in which developed countries, normally the recipient, have higher wage rates. Immigrants are therefore comfortable with a wage rate that is considerably low in the host country, but is better that wage rates in their native countries. They therefore offer cheaper labor and consequently lower production costs (Camarota, p. 1). Immigrants have also been identified with higher labor input than natives have. This may also be a factor of their high utility in their work, especially for those immigrants whose main reason for movement was to get an employment opportunity. Better labor input in terms of quality and quantity therefore means efficiency in production and higher quantity of production towards higher gross domestic product. More immigrants in the labor market therefore translate to higher productivity in an economy. Immigration also has a general impact of increasing labor su pply in an economy because availability of labor is a factor of the total active adult population size. Consequently, immigration helps an economy to solve its general problem of scarcity of human resource. The trend of immigrants’ jobs in the labor market also identifies their significance with respect to the types of jobs that they do. Research has for example shown that immigrants majorly occupy unskilled employments that are rarely performed by natives. They consequently fill a labor gap that would be realized in their absence. This means that regardless of reported unemployment rates in the host countries’ economies, immigration is not a factor because majority of immigrants fit into types of jobs that are not sought by the natives (Camarota, p. 1). The fact that some immigrants, especially legal immigrants, have skilled potential is another advantage to the host country’s economy because of the diversified skills that they offer towards consumer utility an d contribution to the economy’s productivity. These categories of immigrants are however few and do not impose significant competition, in the job market, to natives. A general influx of immigrants also has social benefits to the hosts, as it

What factors should be considered by researchers when defining the Essay

What factors should be considered by researchers when defining the data required for their research;using two empirical studies - Essay Example duct the research in the best way to ensure that the investigated research question leads to data findings that contribute to the knowledge in the investigated field. Basing on two empirical studies, this paper therefore, investigates various factors, which must be considered by researchers in their definition of data that is required for their research. The reference point in explaining the facts of this essay bases on two empirical studies conducted in different areas. One study was conducted in Vietnam among injection drug users in two districts, to compare the prevalence of HIV and other associated risks among the drug users in the two different districts (Bergenstrom et al, 2008). Another study was conducted in the USA, involving different HVC treatment programs for HVC positive clients. This study however, studied two categories of these treatment programs, including the HVC drug free programs and the HVC MMTPs programs (Astone-Twerell et al, 2006). The two studies were conducted for different reasons, thus, the difference in their objectives. The study among the injection drug users in Vietnam was conducted with the purpose of establishing the prevalence of drug overdose in the region, including the main reasons behind this phenomenon. The additional voluntary HIV testing was aimed at helping to get more information about the relationship between drug use, age, and HIV prevalence. Therefore, the study samples were studied differently to establish and assess the prevalence rate, as well as the characteristics that are associated with non-fatal drug overdose among the injection drug users in the two districts of North Vietnam (Bergenstrom et al, 2008). On the other hand, the second study aimed at establishing the range of Hepatitis C Virus services, which are provided to HVC positive clients by treatment programs. In both studies, the research was based on drug use and the relationship with a specific disease. While the Vietnam study compares the injection